User's Manual
Table Of Contents
- Get started with your HP iPAQ
- Home screen
- Getting Started
- Status icons
- Keyboard
- Center Select button
- Know your HP iPAQ
- Customize your HP iPAQ
- Use Key Guard
- Lock and unlock your HP iPAQ
- Use the SIM PIN to protect information on your HP iPAQ
- Battery saving tips
- HP Power Save Mode
- Use your HP iPAQ
- Call features
- Make calls
- Redial a number
- Answer calls
- Mute a call
- Put a call on hold
- Create an appointment during a call
- Use call waiting
- Make emergency calls
- Make calls using speed dial
- Make data calls
- Make a conference call
- Make a call from a hyperlinked phone number
- Make international calls
- Use voice mail
- Use the handsfree function
- Call history
- Voice commands
- Change the service settings
- Select a frequency band
- Voice notes
- Reset your HP iPAQ
- Call features
If the programs get corrupted or uninstalled, you can reinstall them by using the synchronization
software. To reinstall the program do the following:
1. On your computer, open the synchronization software, click Tools > Add/Remove Programs.
2. Select the program to be added and click OK.
3. Check the screen of your HP iPAQ to see if any further steps are necessary to complete the
program installation.
TIP: The nine most recently accessed programs can be displayed on the Start menu. To disable this,
clear the Show Recent Programs check box in the Home screen settings.
Set clocks and alarms
You can change time and set alarms on your HP iPAQ.
To set time:
1. Press Start > Clock & Alarm > Date and Time.
2. Select to edit the following settings:
●
Time zone
●
Date
●
Time
3. Press Done.
NOTE: To synchronize the clock according to your current time zone, select the Sync to current time
zone check box.
To be notified about time updates, select the Notify me when time is updated check box.
To set an alarm:
1. Press Start > Clock & Alarm. Select the Alarm to set.
2. Select to edit the following settings:
●
Alarm Time
●
Alarm
●
Alarm Sound
●
Alarm Type
●
Alarm Volume
3. Press Done.
Use Key Guard
Key Guard locks all keys and buttons to prevent accidental calls or key presses. When the display turns
off or times-out as per the display settings, this feature automatically locks your HP iPAQ. To change
the display settings, press Start > Settings > Power Management.
The Keyguard is on. Center select button: To unlock message is displayed for 5 seconds when the
screen becomes dim. The display turns off completely and your HP iPAQ goes to sleep mode.
22 Chapter 5 Get started with your HP iPAQ