HP StorageWorks ESL Power Supply Replacement Guide (March 2003)

11 12
Slowly swing
the top of the
rack back into
the cabinet,
and tighten the
two captive
screws to
secure the rack
in the cabinet.
13 14
Close the rear access door
and secure it with a 5/32-inch
Allen wrench.
Turn on the power switch on the new power
supply.
Verify that the
new power
supply “OUTPUT
GOOD” indicator
illuminates green.
Getting Help
• HP Product Information Site:
http://www.hp.com/products/tapestorage
• HP Technical Support and Phone Numbers:
http://www.hp.com/support
• HP StorageWorks Library and Tape Tools
(L&TT) diagnostic software:
http://www.hp.com/support/tapetools
Note: Use L&TT to verify installations
and to ensure your library has the latest
firmware.