HP StoargeWorks ESL9000 series tape library user guide (April 2003)

Sense Data Values
124 HP StorageWorks ESL9000 Series Tape Library User Guide
04 85 08 HORIZONTAL HOME NOT FOUND
Horizontal axis did not reach the home position.
Issue CALIBRATE ALL and retry operation.
Check vertical sensors and flag.
04 85 20 HORIZONTAL TEST FAILURE
The value of the horizontal encoder did not change during the self-test.
Visually inspect vertical axis and belt, look for debris, excessive wear, or
damage.
Issue CALIBRATE ALL and retry operation.
04 85 22 HORIZONTAL ENCODER FAILURE
The value of the horizontal encoder did not change during the self-test.
Visually inspect vertical axis and belt, look for debris, excessive wear, or
damage.
04 85 23 HORIZONTAL POSITION OVERFLOW
The position step counter overflowed.
Issue a CALIBRATE ALL command.
04 85 30 HORIZONTAL MAPPING FAILURE
Scanner was unable to detect horizontal target during calibration.
Determine which target (drive, bin, load port) is not mapping. Inspect
target for scratches, bends, wear, etc.
Invoke CALIBRATE ALL from control panel.
04 88 01 MAXIMUM TEMPERATURE EXCEEDED
Library turns off and remains off until the temperature returns to an
acceptable level 59 to 90
o
F (15 to 32
o
C).
Check fans, look for airflow obstructions, and make sure ambient room
temperature is sufficiently cool.
04 8B 00 PASSTHRU INTERNAL FAILURE
Upgrade firmware to latest revision.
Call your authorized service provider.
04 8B 02 PASSTHRU CURRENT FEEDBACK FAILURE
The pass-through axis is obstructed. Check for obstructions (cables, etc.).
Disconnect unit from power and then manually move the axis to ensure it
moves freely between cabinets, with no binding or undue friction.
Table 26: Sense Data Values (Hexadecimal) (Continued)
Sense
Key
ASC ASCQ Message Name/Description