Operation Manual

To open the embedded web server through Wi-Fi Direct
1. On the printer control panel display, from the Home screen, touch (Wi-Fi Direct).
2. Touch ( Settings ).
3. If the display shows that Wi-Fi Direct is O , touch the toggle button next to Wi-Fi Direct to turn it on.
4. From your wireless computer, turn wireless on, search for and connect to the Wi-Fi Direct name, for
example: DIRECT-**- HP ENVY 5000 series (where ** are the unique characters to identify your printer).
Enter the Wi-Fi Direct password when prompted.
NOTE: To obtain Wi-Fi Direct password, on the printer control panel display, from the Home screen,
touch (Wi-Fi Direct).
5. In a supported web browser on your computer, type the following address: http://
192.168.223.1
.
Embedded web server cannot be opened
Check your network setup
Make sure you are not using a phone cord or a crossover cable to connect the printer to the network.
Make sure the network cable is securely connected to the printer.
Make sure the network hub, switch, or router is turned on and working correctly.
Check the computer
Make sure the computer that you are using is connected to the same network as the printer.
Check your web browser
Make sure the web browser meets the minimum system requirements. For information about system
requirements, see Specications on page 77.
If your web browser uses any proxy settings to connect to the Internet, try turning o these settings. For
more information, see the documentation available with your web browser.
Make sure JavaScript and cookies are enabled in your web browser. For more information, see the
documentation available with your web browser.
Check the printer IP address
Make sure the printer IP address is correct.
To nd out the printer IP address, on the printer control panel display, from the Home screen, touch
(Wireless).
To obtain the printer IP address by printing a network conguration page, on the printer control panel
display, from the Home screen, touch ( Setup ), touch Tools, and then touch Network Conguration
Report.
Make sure the printer IP address is valid. The printer IP address should have the similar format as the
router IP address. For example, the router IP address might be 192.168.0.1 or 10.0.0.1 and the printer IP
address is 192.168.0.5 or 10.0.0.5.
52 Chapter 8 Printer management tools ENWW