- Hewlett-Packard Printer User Manual

84 Chapter 5
Options and Accessories
Accessories
45 MHz to 1 GHz. (Power is supplied by the probe power output of the analyzer.)
• The 11909A low noise preamplifier provides a minimum of 32 dB gain from 9 kHz to
1 GHz and a typical noise figure of 1.8 dB.
Carrying Strap (Part Number E4401-60028)
This carrying strap comes with Options AYT and AYU. It can also be ordered separately
and used with Agilent ESA analyzers.
External Keyboard
You may use any IBM AT compatible keyboard with a mini DIN connector. Screen titles
and filenames can be entered with the external keyboard.
GPIB Cable
For use with Option A4H. The Agilent 10833 Series GPIB cables interconnect GPIB
devices and are available in four different lengths (0.5 to 4 meters). GPIB cables are used
to connect controllers to a spectrum analyzer.
HP/Agilent 11970 Series Harmonic Mixers
The 11970 Series harmonic mixers are available to extend the frequency range of
analyzers with Option AYZ (external mixing) up to 110 GHz. The following six models are
available:
HP/Agilent 11974 Series Preselected Millimeter Mixers
11974 Series preselected millimeter mixers are available to extend the frequency range of
analyzers with Option AYZ (external mixing) up to 75 GHz. Preselection reduces mixer
overload from broadband signals, reduces radiation of local oscillator harmonics back to
the device under test, and reduces the level of image and multiple responses displayed.
Table 5-1.
HP/Agilent Model
Number
Frequency Range
11970K 18.0 to 26.5 GHz
11970A 26.5 to 40.0 GHz
11970Q 33.0 to 50.0 GHz
11970U 40.0 to 60.0 GHz
11970V 50.0 to 75.0 GHz
11970W 75.0 to 110 GHz