Operation Manual

Prepare to print

1. Slide the paper guide all the way to the left.

2. Verify that the photo paper is flat.

3. Place the photo paper in the right side of the tray. The side to be printed on should

face down and the short edge should point towards the printer.

4. Push the paper into the printer until it stops.

5. Slide the paper guide firmly against the edge of the paper.

NOTE: If your software program includes a photo printing feature, follow the

instructions that are provided with the software program. Otherwise, follow these

instructions.

1. Open the photo in a software program that allows editing, such as HP Photosmart

Software.

2. Open the

Printer Properties dialog box.

3. Click the Printing Shortcuts tab.

4. In the Printing Shortcuts list, click Photo Printing-Borderless, and then select the

following options:

• Print Quality: Normal or Best

NOTE: For maximum dpi quality, go to the Advanced tab, and then select

Enabled from the Maximum dpi drop-down list. For more information, see

Maximum dpi.

• Paper Type: An appropriate photo paper type

• Paper Size: An appropriate borderless photo paper size

• Orientation: Portrait or Landscape

5. If necessary, change the HP Real Life Technologies settings. For more information,

see

HP Real Life Technologies photo fix.

6. Select any other print settings that you want, and then click OK.

Use the What's This? help to learn about the features that appear in the Printer

Properties dialog box. For more information, see

What's This? help.

Print photos with a border

NOTE: If you are using the product with a Windows 2000 computer, some features

may not be available. For more information, see

Notice to Windows 2000 users.

Chapter 5

20 Print photos

Print photos