- Hewlett-Packard Printer User Manual
HP PCL Commands
HP DeskJet 600, 700, 800, 900 & HP 2000 Series PCL Developer’s Guide 71
10.13.4 Start Raster
Starts raster mode and specifies the starting position of the raster image.
This command sets the left raster margin. A value of 0 starts the upper left corner of the pic-
ture at the current vertical position on the left edge of the logical page. A value of 1 starts the
upper left corner of the picture at CAP (the current vertical and horizontal position).
Start Raster locks out the commands listed above and clears the seed row.
10.13.5 End Raster
This command ends Raster Mode. It signifies the end of the transfer of a raster graphics
image and ends the current raster row. It performs the following functions:
44
Resets the seed row to zeros.
44
Re-enables commands locked out of raster mode by Esc * r # A.
44
Defaults the compression method to 0.
TABLE 48. Start Raster - Esc * r # A
#
Value
DJ600
DJ610C
DJ660C
DJ670C
DJ680C
DJ690C
DJ695C
DJ810C
DJ830C
DJ850C
DJ870C
DJ880C
DJ890C
DJ895C
DJ970C
HP2000C
EFFECT
0
44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44
Start graphics at logical page
left boundary (current vertical
position)
1
44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44
Start graphics at CAP (current
vertical and horizontal position)
Default
0
Range
0 to 1 - Out of range values default to 0
TABLE 49. End Raster - Esc * r C
#
Value
DJ600
DJ610C
DJ660C
DJ670C
DJ680C
DJ690C
DJ695C
DJ810C
DJ830C
DJ850C
DJ870C
DJ880C
DJ890C
DJ895C
DJ970C
HP2000C
EFFECT
n/a
44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44
Printer returns to text mode
command processing
Default
n/a
Range
n/a