User`s guide

7-3
Company confidential. Murillo/Ravillo User’s Guide. Final Freeze Status: Frozen
This is the cyan on page 7-3 (seq: 149)
This is the black on page 7-3 (seq: 149)
To See the Current Configuration of the Front-Panel
Settings
1 Make sure either a roll or a sheet of media is loaded.
2
Print the Current Configuration Plot, by pressing the up-arrow and down-arrow
keys simultaneously.
STATUS
Ready
↓
↑
Press these two
simultaneously
0014
The Current Configuration Plot lists, in an easy-to-read format, all the items
available in the front-panel menus, together with their current settings (in red
italics, for the HP DesignJet 750C Plus). Note that some of the items do not
appear in the front-panel display unless you have set
Utilities / Menu mode to Full
(the default is Short, so that they do not appear). See the legend at the bottom of
the plot for details.
NOTE. Do not confuse the
Current Configuration Plot with the Service
Configuration Plot,
which you can print by selecting Utilities / Service config.
Apart from its use in calibrating the plotter, as explained on page 7-5, the
Service
Configuration Plot
is likely to be needed only by a service engineer.
RECONFIG.
7
Reconfiguring Your Plotter
To See the Current Configuration of the Front-Panel Settings