Operation Manual

Use single-cartridge mode
Use the single-cartridge mode to operate the HP Deskjet 2510 with only one print cartridge. The single-cartridge
mode is initiated when a print cartridge is removed from the print cartridge carriage. During single-cartridge mode,
the product can copy documents, copy photos, and print jobs from the computer.
NOTE: When the HP Deskjet 2510 operates in single-cartridge mode, a message is displayed on screen. If
the message is displayed and two print cartridges are installed in the product, verify that the protective piece
of plastic tape has been removed from each print cartridge. When plastic tape covers the print cartridge
contacts, the product cannot detect that the print cartridge is installed.
Exit single-cartridge mode
Install two print cartridges in the HP Deskjet 2510 to exit single-cartridge mode.
Related topics
• Replace the cartridges
Cartridge warranty information
The HP cartridge warranty is applicable when the product is used in its designated HP printing device. This
warranty does not cover HP ink products that have been refilled, remanufactured, refurbished, misused, or
tampered with.
During the warranty period the product is covered as long as the HP ink is not depleted and the end of warranty
date has not been reached. The end of warranty date, in YYYY/MM format, may be found on the product as
indicated:
For a copy of the HP Limited Warranty Statement for the printer, see the printed documentation that came with
the product.
Chapter 6
28 Work with cartridges