User Guide

260 Chapter 8 Removal & Installation

Removal & Installation

Window (42-inch)

Removal

1. Open the Window.

2. Unclip the Window hinges from the Top Cover.

Remove the Window from the Printer.

WARNING!: Switch off the printer and remove the power cable.

NOTE: Throughout this section the graphics actually show the HP Designjet 4000 Printer series but the

steps of the procedure are identical for the HP Designjet Z6000 Printer series.

NOTE: Since the hinges are very hard to

unclip, it is recommended that you use a

screwdriver or other tool to forcefully unclip the

Window hinges from the Top Cover.