- Hewlett-Packard Printer Service Manual

Removal and Replacement of Parts (without Calibration) 7-21

Replacement of Parts

Replacement of Modular Ink Delivery System (MIDS)

You will be removing the Modular Ink Delivery System (MIDS) from the printer and installing a new MIDS.

Removing the MIDS

Step 1. Follow Steps 1-9 of Removing the

Power Knob from Replacement of

Power Knob.

Step 2. Remove both screws from the ink supply

station, then remove the pump section.

Step 3. Detach the MIDS by removing the

retainer clip from the carriage assembly

and the center screw between the letters

C and M on the print carriage. Keep the

retainer clip aside as it will be used when

the new MIDS is installed.