- Hewlett-Packard Color LaserJet Printer Owner's Manual

To enable memory for Windows
1. On the Start menu, point to Settings, and click Printers or Printers and Faxes.
2. Select this printer and select Properties.
3. On the Configure tab, click More.
4. In the Total Memory field, type or select the total amount of memory that is now
installed.
5. Click OK.
6. Go to
Checking DIMM installation.
Enabling the language font DIMM
If you installed a language font DIMM in the printer, you must select the Font DIMM option in
the printer driver for the font DIMM to work properly.
To enable fonts from the PCL 5c and PCL 6 printer drivers for Windows
1. On the Start menu, point to Settings, and click Printers.
2. Select this printer and select Properties.
3. On the Configure tab, click More.
4. Select the Font DIMM check box.
5. In the Configure Font DIMMs dialog box, click Add to add the font file.
6. In the Add Font DIMM dialog box, browse to the location of the font file, select the font
file, and click OK.
7. In the Configure Font DIMMsdialog box, select the installed DIMM.
8. Click OK.
9. Print a configuration page. See
Configuration page.
Checking DIMM installation
Check that the DIMMs are installed correctly and working.
To check DIMM installation
1. Turn the printer on. Check that the Ready light is on after the printer has gone through
the startup sequence. If an error message appears, a DIMM may have been incorrectly
installed.
2. Print a configuration page. See
Configuration page.
3. Check the Installed Personalities and Options section on the configuration page and
compare it with the configuration page printed before the DIMM installation.
4. If the amount of recognized memory has not increased:
The DIMM may not be installed correctly. Repeat the installation procedure.
The DIMM may be defective. Try a new DIMM.
188 Appendix A Working with memory and print server cards ENWW