- Hewlett-Packard DesignJet Printer User's Guide

Controlling the Page Format
Adjusting Margins for Roll and Sheet Media
5-14
Non-PostScript Files
Only
For roll media if you select Smaller in the Margins menu selection, you can reduce
the margins to 10 mm on the leading and trailing edges of the media.
NOTE If Smaller margins are selected, the Nesting auto-rotation feature is disabled.
Pages will not be automatically rotated.
Non-PostScript Files
Only
Margins and Automatic Cutting
If the Take up reel is on and the Margins setting is set to Smaller, the printer waits for
the print to dry and the next file to begin printing before cutting the page from the
roll. If you press Form Feed and Cut, the printer immediately cuts off the current
page. When the next file begins, the printer cuts the media again to give this page
the narrow margin.
Print Margins using the HP DesignJet CP UV Ink System
When printing with the media selection UV Opaque vinyl, with extended or normal
margins selected, the leading edge margin will increase by 27.0mm (1.06 inch). The
total leading edge margin for UV Opaque vinyl selection on roll media will be:
Margin Selection Leading Edge Margin Dimension
Normal
46.0mm (1.81 inches)
Extended
56.0mm (2.20 inches)