Compaq TL881 MiniLibrary System Users Guide (May 1999)

Adding a Second Tape Drive D-5
SHR-120366
Figure D-3. Removing the Cover Plate
Removing and Replacing the Drive Caddy Assembly
The drive caddy assembly is an enclosure that holds one or two DLT drives
and the interconnecting cables. The assembly includes the SCSI interface
connectors and cables for the base module, the power cables for the drives,
and communication cables from the drives to the controller PWB.
Removing
Do these steps to remove the drive caddy assembly from the base module.
1. Remove the cover plate as described in Removing and Replacing the
Cover Plate.
2. Disconnect the SCSI cable connectors (1) ( Figure D-4) from the
controller SCSI extension cable.