Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide (July 2000)
Operation 2-5
Compaq Confidential – Need to Know Required
Writer:
Bob Young
Project:
Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide
Comments:
Part Number:
127510-002
File Name:
c-ch2 Operation.doc
Last Saved On:
7/12/00 10:51 AM
NOTE:
When you enter Menu Mode at the Expansion Unit, the Ready light on that module
goes out. This means that the MiniLibrary system is off-line, and the system responds to
all commands from the host with a SCSI Not Ready until you exit Menu Mode and the
Ready light goes on. When you enter Menu Mode at any of the MiniLibrary Base Modules,
the Ready light on that module goes out. This means that the individual module is off-line,
and the system responds to all commands from the host pertaining to that module with a
SCSI Not Ready until you exit Menu Mode and the Ready light goes on.
Table 2-2
Control Panel Button Functions
Escape Enter
At POST screen Not applicable
(Note 2)
Not applicable Not applicable
(Note 3)
Not applicable
(Note 3)
At Default screen Displays Show
Status menu
Enters Menu
Mode
Not applicable Not applicable
At Status
submenu (while
on-line)
Returns to
Default screen
Same as in Menu
Mode
Same as in Menu
Mode
Same as in Menu
Mode
In Menu Mode Rejects currently
displayed choice,
or
Aborts control
panel operation in
progress or
Accepts currently
displayed choice
Moves
1 line
upward through
list of options, or
Scrolls part of
display 1 line
toward top of list
of options
Moves
1 line
downward
through list of
options, or
Scrolls part of
display 1 line
toward bottom of
list of options
In Menu Mode Exits to next
higher menu level
or
Exits Menu mode
to default screen
At Fault screen Not applicable Clears soft errors Not applicable Not applicable
NOTE 1:
There is an auto-repeat feature for the
and buttons. When you press
either button for more than one-half second, the control panel behaves as if you were
pressing and releasing the button about four times per second. This effect stops when
you release the button.