Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide (July 2000)

6-6 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide
Compaq Confidential – Need to Know Required
Writer:
Bob Young
Project:
Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide
Comments:
Part Number:
127510-002
File Name:
g-ch6 Diagnostics and Troubleshooting.doc
Last Saved On:
7/12/00 11:32 AM
Table 6-2
System Error Codes (0xxx)
continued
FSC Message Description
0701 Slv Comm Open Error Failed to open a Slave comm port.
0801 Not In Br. Menu Mode The device is not in browser menu mode.
0802 Invalid Novram Upd. An invalid NOVRAM update occurred in browser
mode.
0803 Executing Immed. Cmd Executing an Immediate command in browser mode.
Table 6-3
SCSI Error Codes (1xxx)
FSC Message Description
1001 SCSI Firmware Error
1002 SCSI FIFO Empty While getting SCSI command bytes, the SCSI chip
reported an empty FIFO before it was expected.
1003 SCSI FIFO Error While getting SCSI command bytes, the SCSI chip
reported that the FIFO was not empty when it should
be empty.
1004 SCSI Gross Error Gross error status was returned by the SCSI chip.
This usually means that the SCSI chip is in an illegal
state.
1005 Illegal SCSI Cnt Cmd The SCSI chip rejected a command from the
firmware.
1006 SCSI Message Error Not reported.
1007 SCSI Invalid Element Firmware error.
1008 SCSI No Pending Int An interrupt was returned from the SCSI chip when
one was not expected.
1009 SCSI Invalid Int An invalid interrupt was returned from the SCSI chip.
1020 No Active Command Status was returned from the control process when
no command was active.
1021 SCSI Invalid Request An invalid request was received from the control
process (firmware error).
continued