DisplayMaker Legacy X-12+ - User Manual

4-30 Head Height Calibration
7. For one side of the carriage, press the p key to move the car-
riage down, and move the sheet of paper repeatedly, until
you feel resistance from the carriage touching the paper on
either side of the carriage.
If the carriage is so low that you cannot move the paper at
all, press the C and p keys to raise or lower the carriage
until you can move the paper, yet still feel some resistance.
8. Repeat step 7 for the other side of the carriage.
9. When the carriage is level, press the B key.
The control panel displays this message:
The head height is calibrated.
10. Press B to park the carriage and return to the Calibrations
menu.