DisplayMaker Legacy Esprit - Print Server and Driver Setup Guide

Configuring the Printer 1-3
4. Set or verify the printer configuration.
Printer Name
◆ Printer Name - this name identifies the printer. It
appears under the Printer icon in System Control and in
various dialog boxes.
◆ ColorMark CMS - for accurate color matching, specify
the Media type loaded in the printer. If a print job speci-
fies a different media, the job is routed to the Output
Attention queue with a disposition of Media Mismatch.
◆ Dithering - Threshold Dithering produces photo-
graphic-quality results. When printing with this screen-
ing method in four colors (CMYK), however, a pattern
may be noticeable. Select Error Diffusion screening for
the smoothest output when printing with four colors.
◆ Ink Level - When you enable Pause on Low Ink, and the
amount of ink for a given color reaches the level you set
in the Ink Warning Level field, the printer pauses
between pages so that you can replace the ink supply. A
warning will be given and the printer will pause after
every page until the ink is replenished. If Pause on Low
Ink is disabled, the printer does not pause and the low
ink warning does not appear. This could result in one or
more colors running out in the middle of a print.
Note Ink level checking is performed only when Pause on Low
Ink is selected.
◆ Ink Saturation - To adjust the ink saturation for all prints
sent to this printer, move the slider control or enter a
number between -5 and +5.