DisplayMaker Legacy Esprit - Print Server and Driver Setup Guide

2-3
Choose Print Options
1. Select Print from your application’s File menu.
The Print dialog box appears.
2. Select General options:
◆ Copies – The number of copies to be printed.
◆ Pages – Click All to print all pages. Type the number of
the first page to be printed in the left box and the last
page to be printed in the right box to print a range.
◆ Paper Source – RollFeeder is the default and should be
used.
◆ Destination – Select Printer to print the file. Select File to
create a PostScript file of the document to your hard disk.
3. Select Background Printing options.
Click the Foreground (no spool file) button, since the file
will be spooled on the print server.
4. Click Printer Specific Options.
The Printer Specific Options dialog box appears.
5. Select Printer Specific Options.
If you select Printer’s Default, the settings that are in effect
on the Port configuration in System Control are used. See
the print server’s online Help for information about config-
uring ports.
◆ Output Quality – Select Image Quality options for the doc-
ument, depending on your needs. ColorSpan’s SmoothTone
software overrides your application’s halftone screens and
corrects for tone transitions using an error diffusion tech-
nology that creates smooth, blended colors between adja-
cent tones. SmoothTone makes continuous-tone images
such as photographs look more realistic.
SmoothTone Full Page – highest quality, applies SmoothTone
error diffusion to all elements on the page. Yields the best
spot color matching.
Mural Better – for large-size prints, rasterizes the page at
300 dpi, and prints images, text, and line art at 600 dpi.
Yields better quality prints for viewing from four-to-five
feet or more.