DisplayMaker Legacy 72S and 72SR - User Manual

Unpacking and Assembly 1-19
37. Connect the power cable to the connector on top of the vac-
uum/pressure assembly.
38. Reinstall the vacuum/pressure system cover.
39. (DisplayMaker 72SR only) Connect the cable from the media-
out sensor cable to the cable from the vacuum/pressure
system.
Both of these cables are marked with a label that says
“MEDIA SNSR.”
Fig. 1-13. Vacuum/pressure system with cable connection
(cover removed)
Fig. 1-14. (DisplayMaker 72SR only)
Connecting the media-out sensor.
From sensor
From V/P system