DisplayMaker Legacy 72S and 72SR - User Manual

1-14 Unpacking and Assembly
Off Head Supply (OHS)
Assembly
25. Remove the pump cover (see Fig. 1-6).
This is necessary to access the lower mounting holes for the
reservoir wire rack. The pump cover attaches to the printer
with two Phillips head screws.
26. Install the reservoir wire rack (see Fig. 1-6).
Insert the top pieces, hooks pointing down, into the mount-
ing holes. Then insert the bottom pieces into the mounting
holes.
27. Reinstall the pump cover (see Fig. 1-6).
28. Attach the ink catch tray to the back of the printer with the
four #3 screws (see Fig. 1-6).
Fig. 1-6. Reservoir wire rack and ink catch tray
Pump cover
Catch tray
Reservoir rack