DisplayMaker Legacy X-12+ - User Manual

Menu 2-15
◆ FineLine Mode — allows you to tune the printheads for
improved fine line quality, and eliminate the “ghost” image
on backlit media, caused by ink transfer during takeup.
Select FineLine Mode Off (the default setting) for most
printing with large areas of high ink coverage. Select Fine-
Line Mode On to reduce the jagged appearance of fine lines
and eliminate “ghosting.”
FineLine Mode is effective during the earlier portion of the
printhead’s service life. When excessive jet-outs or banding
occurs, select FineLine Mode Off, and operate the printhead
in this mode for the remainder of its service life.
Reset All Defaults
◆ Restore All Defaults — restores all Printer Configuration set-
tings to their factory default values, and zeroes all registra-
tion data. After running this option, all calibration values
must be reestablished by running AutoSet.
◆ Zero Platen Width — sets the platen width to zero, which
forces the printer to measure the platen on the next power
up.
◆ Measure Platen — measures the platen width.