DisplayMaker Legacy X-12+ - User Manual
Front Page 2-7
◆ Status — displays the status of all user-configurable options.
Press { (Page) to scroll between pages. To change an
option, go to the Printer Configuration section of the menu.
Page 4 contains the current Media Wizard settings (see
“Media Wizard” on page 2-19).
◆ Advance Media — press the p key to advance the media for-
ward. When you press and hold the p key, the media moves
faster. You can also press the Media Advance switch on the
rear of the printer, below the left profiler docking station, to
advance the media. Press the C key to advance the media
back onto the supply spool. When you press and hold the C
key, the media moves faster.
◆ Menu — displays the complete printer menu for access to
advanced configuration options (see “Menu” on page 2-10
for instructions).
◆ AutoSet — performs a “one touch” calibration of the printer:
bidirectional and head-to-head alignment of printheads, and
AutoJet substitution mapping of deflected or missing jets.
See “AutoSet” on page 4-2 for instructions.
Fig. 2-4. Status page 1