DisplayMaker Legacy X-12+ - User Manual

1-6 Unpacking and Assembly
8. Remove the ink tray boxes, stand legs, and accessory boxes,
which are packed together at the bottom of the pallet.
Do not remove the printer module from the pallet at this
time. The printer rests on two shipping supports. You will
use these supports and two assembly supports to help
assemble the printer.
Note
Replacement shipping packaging and instructions
are available from MacDermid ColorSpan Technical
Services (phone: [phone]).
9. Refer to the following list to verify that you received all of the
parts and accessories.
Notify ColorSpan immediately if you are missing any of the
components listed in the following table.
Parts List
Main Box Outside of Box:
◆ “Watch Me First” CD-ROM
◆ Unpacking & Assembly Diagram
◆ Declaration of Conformity
Inside of Box:
◆ (1) Printer Module
◆ (1) Stand crossbar
◆ (2) Media spools with collets
◆ (2) Stand legs
◆ (1) Ink tray box
◆ (1) Accessory box
Ink Tray Box
◆ (2) Ink trays
Accessory Box
◆ (2) Spare ink tubes
◆ (2) Red-headed bolts with washers
◆ (4) Silver Phillips head screws
◆ (8) Black Phillips head screws
◆ (1) Phillips screwdriver
◆ (1) VideoNet or Ethernet cable
◆ (1) Ink maintenance kit: manual priming
bulb, purge clip
◆ (1) Fill system drain tube and drain bottle
◆ (1 set) Color Map cards
◆ (1 sheet) ink type/color labels
◆ (1 sheet) ink position number labels
◆ (1) Service station
◆ (1) Power cord (U.S. or European)
◆ Documentation, warranty, and software
license agreement