DisplayMaker Legacy X-12+ - User Manual
Calibration Summary 4-21
Calibration Summary These options allow you to print a summary of the AutoSet cali-
bration, or transmit calibration data to a log file on the print
server.
◆ AutoSet Summary — when enabled, a table of the results of
the AutoSet calibration is printed after the AutoSet test
patterns. If you enable the AutoSet Summary, you can show
or hide the detailed calibration data.
◆ Log Head Registration Data — sends head registration data
to a log file on the print server.
◆ Log Jet Data — sends jet data to a log file on the print server.
Description Show Details Version Hide Details Version
Calibration Results — Reports whether the printer was
calibrated successfully.
Shown Shown
Header — Date and time of the AutoSet calibration,
printer software version, printer model, estimated head
height
Shown Shown
Ink Sample — Sample color block, for identification only
(not a print quality test).
Shown Shown
Head — Printhead position number. Shown Shown
Profiler/Pen Present — The ink type (EC-Endura•Chrome
or PC-Perma•Chrome) and color reported by the profiler.
Shown Shown
Cartridge Needs Cleaning — No: passed all calibrations,
or Yes: failed one or more calibrations.
Shown Shown
Total Bad Jets — The number of missing and deflected
jets on the printhead. Use this number and the Jets Dis-
qualified, Jets Out, and Jets Unfixed numbers to evaluate
cartridge performance.
Shown Hidden if no bad jets present,
Shown if bad jets present
Fig. 4-22. AutoSet Summary (Show Details Version)