DisplayMaker Legacy 72UVX and 98UVX - User Manual

3-28 Loading Rigid Media
1. On the Front Page screen of the control panel, press the Load
Media key.
The control panel presents a list of media types. You can
select a ColorSpan media from the list, or select Custom (at
the end of the list) to specify a new media. The printer’s
Media Wizard feature stores a set of parameters for each
media type, which can be recalled and applied whenever
you change media types. (See “Media Wizard” on page 3-42
for details.)
2. Select the media type you are loading, or create a new media
type.
The control panel displays the current settings for the media
type you choose.
If you are creating a new media type, you are prompted to
enter a Media Name and Thickness.
3. Press one of the change keys to change any of the settings,
print mode, or media type, or press the ! key to continue.
◆ If you press one of the change keys, a screen appears to
allow you to change any of the settings. Then press the
! key to continue. See “Media Wizard” on page 3-42
for information about these settings.
Fig. 3-12. Media settings