DisplayMaker 72UVR - Print Server and Driver Setup Guide

1-20 Color Management
ICC Workflow Once sent to the ColorSpan RIP, the profile of an ICC print job
cannot be changed, since color correction in this workflow is
applied at the client workstation, not at the RIP.
MediaSaver is not available for ICC jobs.
To use an ICC workflow, follow these steps:
1. Create, then copy and install the ICC profile (correspond-
ing to the ink set and media you are using) to your Macin-
tosh OS or Microsoft Windows based workstation.
You can use the ColorMark+ Advanced Color Management
System Software to create ICC profiles. You can also use
software from third-party sources such as Onyx Graphics,
Monaco Systems, and GretagMacbeth. Install the profiles as
explained in the user documentation that accompanies these
products.
2. Set the color space in the printer driver (on the client
workstation) to Printer’s Default.
3. In the Port Configuration dialog box on the ColorSpan RIP,
set the Image Quality to ICC SmoothTone Full Page, ICC
Mural Better, or ICC Mural Bigger. (See


 in Fig. 1-10 on
page 1-21.)
4. Select the ink set and media you are using. (See


 in Fig.
1-10 on page 1-21.)