Headstrikes On ColorSpan Lecacy Solvent Printers 1
Definition A headstrike is any event that causes the printheads or other parts of the carriage to come in contact with the media while printing. Causes Headstrikes usually happen when one or two conditions arise on the printer and/or the media. The first condition is a head height that is too low. Head height is the distance from the media surface to the lowest point of the carriage. On 72S and SR printers, the standard head height is 0.085”.
Other Lingering Effects Intermittent Jets These jets may pass an AutoJet or AutoSet calibration, but when printing begins they drop out. The jets have some small solid particle lodged within the jetting nozzle or orifice. As the particle moves around, it can alternately allow the jet to fire or it can block the jet completely.
Additional Evidence The photographs below are actual prime bar patterns printed by heads that sustained damage in a headstrike. These images are characteristic of printheads that have suffered a headstrike.
© Copyright 2008 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
