DisplayMaker Legacy Mach 12 - Print Server and Driver Setup Guide

Configuring the Printer 1-3
Printer Name
This name identifies the printer. It appears under the Printer
icon in System Control and in various dialog boxes.
ColorMark CMS
◆ Media
— for accurate color matching, specify the media type
loaded in the printer. If a print job specifies a different
media, the job is routed to the Output Attention queue with
a disposition of Media Mismatch.
◆ Width
— width of the media, as measured by the printer.
◆ Ink Type
— type of ink installed, as detected by the printer.
Dithering
◆ Dither Mode
— The
Threshold Dithering
screening method
produces photographic-quality results. When printing with
this screening method in four colors; however, a pattern may
be noticeable. Select
Error Diffusion
screening for the
smoothest output when printing with four colors.
Color Adjustment
Select a color adjustment file to suit your output color
requirements.
Ink Level
◆ Pause On Low Ink
— when enabled, and the amount of ink
for a given color reaches the level you set in the
Ink Warn-
ing Level
field, the printer pauses between pages so that you
can replace the ink supply. A warning will be given and the
printer will pause after every page until the ink is replen-
ished. If Pause on Low Ink is disabled, the printer does not
pause and the low ink warning does not appear. This could
result in one or more colors running out in the middle of a
print.
◆ Ink Warning Level
— defines the
Low Ink Warning
level, as
a percentage of ink remaining.
Lighter Prints—Darker
Prints
To adjust the ink saturation for all prints sent to this printer,
move the slider control or enter a number within the valid range
in the text entry box.