DisplayMaker Legacy X-12+ - User Manual

Manual Calibrations 4-5
8. Select one of the options and press the E (Menu In) key to
continue.
The printer asks whether you want to print the media feed
calibration.
9. Press the B key to continue.
The printer asks whether you want to print the media feed
calibration.
10. Press the B key to continue.
The printer prints the calibration marks, and prompts you to
adjust the advance.
11. With a metal yardstick, measure the distance between the
hairline marks (the thicker marks are to ensure working jets).
A measuring stick with 1/64 inch markings works best. For
maximum accuracy, begin measuring at the 1-inch mark,
and subtract 1 inch from the result.
12. Adjust the media feed advance using the control panel.
You can increase the advance by pressing the C key, or
decrease it by pressing the p key.
13. Press B (Proceed) to save the advance value you entered.
14. Press B (Proceed) to return to the menu.
Fig. 4-15. Media Feed Calibration pattern
Measure from here... ...to here.