DisplayMaker Legacy X-12 - Print Server and Driver Setup Guide

1-18 Calibrating ColorMark Software
The box moves to the next swatch on the screen as a beep
signals that you can take the next reading.
c. Repeat these readings with the next swatch until you
have measured all of the swatches.
To start over at any time during the calibration process, click
Cancel in the dialog box. The previous profiling informa-
tion is preserved and the calibration process is terminated.
If you take a white point reading after reading some or all
color values, all color values are removed from the screen,
and you must restart the reading of color values.
Be sure to take a reading for each color. If you make a mis-
take, click Cancel and start over.
d. When the values of all swatches are displayed and cor-
rect, the Save switch is enabled.
When all of the swatches have been read, a dialog box
appears that shows the calibration data for each swatch.
15. Accept or cancel the calibration data.
◆ If you accept the data, color calibration is complete.
◆ If you cancel the data, the calibration data is discarded.