DisplayMaker Legacy Mach 12 - Print Server and Driver Setup Guide

1-8 Configuring the Input Port
Black
Allows you to specify Rich Black, which creates black by com-
bining all process ink colors; or Pure Black, which uses only
black ink to reproduce black. Choose Rich Black when creating
backlit output or when an extra-dark black is desired.
Image Quality
Select the image quality based on how fast you want the job to
RIP and print, the level of apparent resolution required, and the
quality of gradients required. You can choose from:
◆ SmoothTone Full Page
— highest quality, applies SmoothTone
error diffusion to all elements on the page. Yields the best
color matching.
◆ Mural Better
— image quality is very close to SmoothTone Full
Page, but RIP times are much faster. Switch to SmoothTone
Full Page if text or line art quality is too “jaggy” at the
intended viewing distance.
◆ Mural Bigger
— Mural Bigger prints faster, which produces
lower quality at close viewing range. The RIP time is less for
this mode than for any other mode.
◆ Traditional Halftone —
use when a traditional halftone dot
screen is required; allows the screen frequency and angle to
be specified.
Default Media Size
Select a media size from the popup menu that the server can use
if no media size is specified in the print job.
Printing Options Copies
Type in the number of copies you want to print. This number
applies to each print job sent through this port.
N-UP
To conserve media for smaller-sized jobs, you can print the cop-
ies side-by-side. When you select the N-UP checkbox, specify the
width of the gutter (space between copies).