DisplayMaker Legacy 72SI and 98SI - Print Server and Driver Setup Guide

Color Calibration 1-27
Spectrolino SpectroScan 30. Place the calibration pattern onto the SpectroScan table.
31. Following the prompts on the print server, home the sen-
sor to reference points 1, 2, and 3.
Confirm each point by clicking the confirmation button
that appears on the print server screen.
For SpectroScan operating instructions, refer to the manu-
facturer’s user manual.
32. Click the OK button on the print server.
The readings are taken.
33 . T o to st ep 34 .
Finishing the Calibration When reading is complete, the server asks whether you would
like to save the readings for the ColorMark color calibration.
34. Accept or cancel the calibration data.
◆ If you accept the data, color calibration is complete.
◆ If you cancel the data, the calibration data is discarded.