DisplayMaker Legacy 72S and 72SR - User Manual

First-Time Power-Up and Test Print 1-27
Install Ink for the First
Time in the Printer
1. Shake each bottle of ink for one minute to redisperse the
pigments.
It is not necessary to shake the cleaning solvent.
The green “ready for refill” LEDs should be illuminated,
indicating that you may fill the reservoirs.
2. Empty the refill bottles into their corresponding reservoirs,
and install the profilers into their corresponding positions in
the docking station.
Cleaning solvent Yellow Magenta BlackCyan
Profiler docking station:
Fig. 1-19. Ink color locations
Solvent Y M C K