DisplayMaker Legacy 72S and 72SR - User Manual

6-22 Color Calibration
Color Calibration Color control functions can be accessed by clicking and holding
the mouse over the printer icon. This displays the icon menu
shown below:
◆ For instructions on ColorMark CMS and Manage Profiles,
refer to the System Control User Guide.
◆ For instructions on Create, refer to the ColorMark+ User Guide.
Calibrating the ColorMark software (linearization) ensures color
consistency between prints by compensating for variations in
ink drop size that normally occur. It is not necessary to calibrate
after printing any specific number of jobs. Calibrate the Color-
Mark CMS under these circumstances:
◆ When you first install the printer
◆ When you switch media or print modes, especially between
Billboard and Production or High Quality modes
◆ When you notice a change in the color consistency of the
printer output
The GretagMacbeth Spectrolino SpectroScan or ColorMark Cali-
brator (X-Rite DTP22) spectrophotometer can be used to cali-
brate the printer.
Fig. 6-11. Printer icon menu