DisplayMaker Legacy 72S and 72SR - User Manual

6-10 Selecting Server Options
◆ Mural Better — image quality is very close to SmoothTone Full
Page, but RIP times are much faster. Switch to SmoothTone
Full Page if text or line art quality is too “jaggy” at the
intended viewing distance.
◆ Mural Bigger — Mural Bigger prints faster, which produces
lower quality at close viewing range. The RIP time is less for
this mode than for any other mode.
Default Media Size — Select a media size from the popup menu
that the server can use if no media size is specified in the print
job.
Printing Options
Copies — Type in the number of copies you want to print. This
number applies to each print job sent through this port.
N-UP — To conserve media for smaller-sized jobs, you can print
the copies side-by-side. When you select the N-UP checkbox,
specify the width of the gutter (space between copies). The
prints will automatically be fitted across then down the media
until the number of copies specified are printed.
Step-and-Repeat — Step-and-Repeat prints copies of an image
across the width of a page, offsets the image horizontally, then
prints another row of the image, and so on until the end of the
page is reached. This is useful for applications such as stage back-
grounds.
Fig. 6-5. Step-and-repeat dimensions
Length
Gutter
Offset