DisplayMaker Legacy Esprit - Print Server and Driver Setup Guide

Configuring the Input Port 1-9
Step-and-Repeat
Step-and-Repeat prints copies of an image across the width of a
page, offsets the image horizontally, then prints another row of
the image, and so on until the end of the page is reached. This is
useful for applications such as wallpaper, textile prints, set back-
grounds, and gift wrap mock-ups.
To specify step-and-repeat settings for an image:
1. In the System Control interface, route a port to the Output
Hold queue, or pause the Standard port.
2. Print an image to the port that is routed to the Output
Hold queue or paused Standard port.
After the job has RIPed, it appears in the queue.
3. Open the queue, then open its Document Details dialog
box.
The Document Details dialog box appears.
4. In the Details section, click the “Printing” radio button to
display the Step-and-Repeat properties.