DisplayMaker Legacy 72UVX and 98UVX - User Manual

5-6 Clean the Rail and Bearings
4. Clean the left and right outside bearings.
Moisten a cotton swab with isopropyl alcohol or water, place
it against the left side of the bearing, and manually push the
carriage to the left. Then place the swab against the right side
of the bearing, and manually push the carriage to the right.
Repeat once or twice. Remove any large dust particles you
see.
5. Clean the left and right inside bearings.
Insert a moistened cotton swab into the bearing cleaning
window, and clean the bearing by manually pushing the car-
riage to the left and right. Repeat once or twice. Remove any
large dust particles you see.
6. Press the ! (Proceed) key to return the carriage to the home
position.
Outside bearing
Inside bearing
Rail
Fig. 5-3. Carriage bearings, left pair shown
Cleaning window