DisplayMaker Legacy 72SI and 98SI - Print Server and Driver Setup Guide

1-12 Selecting Server Options
field, enter the length you want the step-and-repeat pat-
tern to be printed.
◆ Gutter Width - enter the blank space you wish between
each image row.
◆ Step and Repeat Offset - enter the offset amount, as a
percentage of the image’s width. The offset amount is
the amount of space between copies of the image in a
row.
5. Click OK to save the settings.
The job appears in the queue with a Step-and-Repeat icon, as
shown below.
6. To print the job, unpause the queue, or move the job to an
active Output port.