DisplayMaker Legacy 72UVX and 98UVX - User Manual

Special Features 1-19
Media Handling ◆ Half-inch head height — the printer can accept rigid sheet-
fed media up to 0.5 inches (12.7 mm) thick. When switch-
ing between media less than 0.25 and greater than 0.25
inches thick, three simple adjustments are necessary for print
quality and UV light blocking. See “Loading Rigid Media” on
page 3-27 for instructions.
◆ Media width sensing — automatically detects the width and
position of the media loaded, for precise image placement.
◆ AutoEdge — automatically aids the loading of rigid sheets by
detecting the leading edge.
◆ Rigid media roller tables — specially-designed roller tables
support rigid media for precise media advance and best print
quality. Stabilizer bars ensure stable handling of heavy
media. A second set of tables can be attached and clamped
to the first set to support longer media. The tables can be
easily connected to and removed from the printer as needed.
◆ Steel media spools — the takeup supports up to 7.5 inch
(190 mm) diameter rolls of vinyl media on 3-inch cores. The
supply can also accept 2-inch cores with the supplied 2-inch
collets. On the 98-inch model, spool supports and a rein-
forcement sleeve support the weight of longer rolls of media
less than 72 inches wide.
◆ Tensioned roll-to-roll media handler — tensioning is auto-
matically maintained on the supply and takeup as the roll
diameters change during printing. Optionally, the supply or
takeup motors can be idled during printing. In roll-fed
mode, the supply must be loaded, but the media can option-
ally be left off the takeup.