DisplayMaker Legacy 72UVX and 98UVX - User Manual

(UV) UV Lamps
A-UV-1 Right UV Lamp Disabled The right UV lamp has been dis-
connected or has overheated.
If the lamp is disconnected, power
down the printer and reconnect
the cable. If the lamp has not
been disconnected, allow the lamp
fan to run and wait for the lamp to
cool.
A-UV-2 Left UV Lamp Disabled The left UV lamp has been discon-
nected or has overheated.
If the lamp is disconnected, power
down the printer and reconnect
the cable. If the lamp has not
been disconnected, allow the lamp
fan to run and wait for the lamp to
cool.
A-UV-3 UV Control Error The printer is unable to communi-
cate with the UV lamps' control
board.
Check cable connections and
restart the printer. If the problem
continues, contact your ColorSpan
Authorized Service Provider or Col-
orSpan Technical Support.
A-UV-4 UV Control Error The UV lamps' control board revi-
sion is unsupported.
Contact your Authorized Service
Provider or Technical Support to
have it upgraded.
A-UV-6 UV Control Error The printer is unable to communi-
cate with the UV power supply.
Ensure the power to the UV power
supply is turned on and that the
data cable is connected. If the
problem continues, contact your
Authorized Service Provider or
Technical Support.
A-UV-7 UV Control Error The UV lamps' power supply revi-
sion is unsupported.
Contact your Authorized Service
Provider or Technical Support to
have it upgraded.
A-UV-10 UV Shield Up The UV shield on the front of the
carriage has been raised.
Lower the shield to allow the UV
lamps to turn on and to allow
printing.
W-UV-1 Right UV Lamp Needs
Replacing
The right UV lamp is nearing its life
expectancy.
The right UV lamp should be
replaced to ensure optimal curing
performance.
W-UV-2 Left UV Lamp Needs
Replacing
The left UV lamp is nearing its life
expectancy.
The left UV lamp should be
replaced to ensure optimal curing
performance.
Table B-1. Action and Warning Messages
Description Cause What to do