DisplayMaker Legacy 72UVX and 98UVX - User Manual

Table B-1. Action and Warning Messages
Description Cause What to do
(HW) Head Warmer
A-HW-[41-56] Printhead [n]
Warmer Too Warm
The printhead has gotten too
warm.
Contact your ColorSpan Autho-
rized Service Provider or ColorSpan
Technical Support.
A-HW-[61-76] Printhead 1 Set-
point Too Warm
The printhead setpoint is too high. Contact your ColorSpan Autho-
rized Service Provider or ColorSpan
Technical Support.
W-HW-[1-16] Printhead [n]
Warmer Disconnected
The printhead warmer indicated is
disconnected or not functional.
With the printer power off, ensure
that the head warmer is connected
and restart the printer. If the prob-
lem continues, contact your Color-
Span Authorized Service Provider
or ColorSpan Technical Support.
W-HW-[21-36] Printhead [n]
Warmer Wiring
The printhead warmer and ther-
mister may be wired incorrectly.
Contact your ColorSpan Autho-
rized Service Provider or ColorSpan
Technical Support.
W-HW-[41-56] Printhead [n]
Warmer Too Warm
The printhead has gotten too
warm.
Contact your ColorSpan Autho-
rized Service Provider or ColorSpan
Technical Support.
W-HW-[61-76] Printhead [n]
Setpoint Too Warm
The printhead setpoint is too high. Contact your ColorSpan Autho-
rized Service Provider or ColorSpan
Technical Support.
(IS) Ink Sensing
A-IS-[n] [color] Out Of Ink The off-head ink reservoir indi-
cated is out of ink.
Refill off-head ink reservoir.
A-IS-[21-24] [color] Missing Ink
Profiler
The ink profiler indicated is not
detected.
Ensure that the ink profiler is
installed.
A-IS-30 Profiler Setup Error Ink profilers in wrong positions or
incorrect ink profiler inserted.
Change profilers to match ink
order or insert correct profiler for
ink type.
A-IS-[31-34] Incorrect [color]
Profiler
The profiler indicated is the wrong
color or the wrong ink type.
Replace the profiler with appropri-
ate profiler.
A-IS-[41-44] Invalid [color] Profiler The profiler indicated is not valid. Replace the profiler with appropri-
ate profiler.