DisplayMaker Legacy X-12+ - User Manual

3-18 Installing Ink for the First Time in a New Printer
15. Install the printhead into the carriage.
Install the printhead into the correct position. You can use
the built-in handle to help position the printhead.
16. Repeat steps 7 through 15 for each ink tube you want to fill.
17. Close and latch the carriage cover(s).
18. Close the printer’s top cover.
On the control panel Front Page screen, press the B (Pro-
ceed) key to park the printhead carriage into the service sta-
tion.
See “Loading Media” on page 3-26 for media loading
instructions.
After installing one or more printheads, always run AutoSet. See
“AutoSet” on page 4-2 for instructions.