Operation Manual
Economy conservation settings
Introduction
The printer includes several economy features to conserve energy and supplies.
●
Print with EconoMode
●
Set the Sleep/Auto O After setting
●
Set the Shut Down After delay and congure the printer to use 1 watt or less of power
●
Set the Delay Shut Down setting
Print with EconoMode
This printer has an EconoMode option for printing drafts of documents. Using EconoMode can use less toner.
However, using EconoMode can also reduce print quality.
HP does not recommend the full-time use of EconoMode. If EconoMode is used full-time, the toner supply
might outlast the mechanical parts in the toner cartridge. If print quality begins to degrade and is no longer
acceptable, consider replacing the toner cartridge.
NOTE: If this option is not available in your print driver, you can set it using the HP Embedded Web Server.
1. From the software program, select the Print option.
2. Select the printer, and then click the Properties or Preferences button.
3. Click the Paper/Quality tab.
4. Click the EconoMode check box.
Set the Sleep/Auto O After setting
Use the control panel menus to set the amount of idle time before the printer enters sleep mode.
NOTE: The steps vary according to the type of control panel.
2-line control panels
1. On the printer control panel, press the OK button.
2. Open the following menus:
72 Chapter 5 Manage the product ENWW