- Hewlett-Packard Color LaserJet User Guide

http://www.hp.com/support/lj9500

194 Chapter 7 – Supplies Rev. 1.0

19 Pinch the plastic tab on the end of each roller to remove the roller. Remove

all three rollers.

20 Grasp each new roller by both sides and slide it onto the corresponding rod

until the roller clicks into place. Replace the tray-2 rollers using steps 18

through 20.

Note

Make sure that the small roller is to the left in both trays.

21 Align tray 2 with the rails inside the printer, and then slide the tray into the

printer. Align tray 3 with the rails inside the printer, and then slide the tray

into the printer.