- Hewlett-Packard Printer Getting Started Guide

30
EN
5
Load media into the tray up to the
media-fill mark. For example, up to
2,000 sheets of 20 lb. (75 g/m
2
) bond
paper will fit in the tray. For
information on loading and orienting
media, see the online user guide or
the quick reference guide.
Note
Do not place anything in tray 4 to the left
of the media guides (C) or the printer will
not lift media out of the tray. Also, do not
fill media above the media-fill mark on
the left media guide. Too much media in
the tray can cause media jams.
6
Press down on all four corners of the
media stack to ensure the media
rests flat in the tray.
7
Close tray 4.
Set the media type for tray 4 in the
printer control panel. For instructions,
see “Step 8: Configuring Input Trays.”
Note
Always configure the media type in the
printer control panel to prevent users
from printing on the wrong media type.