User Guide

Configuration pages
Depending on the model, up to four pages print when you select PRINT CONFIGURATION. In
addition to the main configuration page, an embedded Jetdirect configuration page prints as well as a
page for the fax accessory and a page for the optional paper-handling options.
Configuration page
Use the configuration page to view current MFP settings, to help troubleshoot MFP problems, or to
verify installation of optional accessories, such as memory (DIMMs), trays, and printer languages.
NOTE If an optional 3-bin mailbox or stapler/stacker is installed, a page also prints for that
device.
NOTE If an analog fax accessory is installed, a fax accessory page also prints. See the
HP LaserJet Analog Fax Accessory 300 User Guide for information about understanding the
fax accessory page.
The MFP configuration page contains the following information:
1 Device Information lists the model and serial number, engine cycles, firmware datecodes, maintenance kit counts,
calibration information, color density, and other information for the MFP.
2 Installed Personalities and Options lists all MFP languages that are installed (such as PCL and PS), and lists
options that are installed in each DIMM slot and EIO slot.
3 Color Density shows current settings for highlights, midtones, and shadows.
4 Calibration Information lists the last CPR and last DMax/DHalf calibrations.
5 Memory lists the MFP memory information, PCL Driver Work Space (DWS), and I/O buffering and Resource Saving
information.
626 Chapter 7 Troubleshooting ENWW