User Guide

Supported types and sizes of print media
The following table lists the types of media that the MFP supports.
Table 1-8 Supported types of media
Type of media Tray 1 Trays 2, 3, and 4 Duplexer 3-bin mailbox
or stacker
Stapler
Plain X X X X X
Preprinted X X X X X
Letterhead X X X X X
Transparency X X X
Prepunched X X X X X
Labels X X X
Bond X X X X X
Recycled X X X X X
Color X X X X X
Cardstock X
X
12
Rough X X X X X
Envelope X
X
12
1
Face-down delivery only.
2
If a 3-bin mailbox is installed, select the bottom bin when printing on cardstock. Media weights that are 200 g/m
2
(53 lb) or
heavier are supported only in the bottom bin.
Table 1-9 Tray 1 media sizes
Tray 1 Dimensions Weight or thickness Capacity
Paper and cardstock,
standard sizes (letter/A4,
legal, executive, JIS B5, A5);
custom sizes
Range:
76 x 127 mm (3 x 5 inches) to
216 x 356 mm (8.5 x 14 inches)
Range:
60 g/m
2
(16 lb) bond to
220 g/m
2
(60 lb) bond
Maximum stack height:
10 mm (0.6 inches)
Equivalent to 100 sheets
of 75 g/m
2
(20 lb) bond
Glossy paper (letter/A4,
legal, executive, JIS B5, A5)
NOTE Do not use
inkjet papers in this
MFP.
Range:
76 x 127 mm (3 x 5 inches) to
216 x 356 mm (8.5 x 14 inches)
Range:
75 g/m
2
(20 lb) bond to
220 g/m
2
(60 lb) bond
Maximum stack height:
10 mm (0.6 inches)
Transparencies (letter/A4),
suitable for use in color laser
printers
Letter: 216 x 279 mm
(8.5 x 11 inches)
A4: 210 x 297 mm
(8.27 x 11.7 inches)
Minimum 0.13 mm
(0.005 inches) thick
Maximum stack height:
10 mm (0.6 inches)
HP Tough paper (letter/A4) Letter: 216 x 279 mm
(8.5 x 11 inches)
0.13 mm (0.005 inches) thick Maximum stack height:
10 mm (0.6 inches)
22 Chapter 1 Product information ENWW