User Guide

10. Remove the gear (callout 15).
NOTE The gear (callout 15) can easily be removed from the pickup assembly. Before
installing the pickup assembly, be sure the gear is present.
Figure 6-362 Remove the lower pickup assembly (7 of 7)
Hint When reinstalling the lower pickup assembly, use the alignment pins (callout 16)
on either side as a guide to align the assembly with the holes in the frame. Be sure that
the gears on the right side of the lower pickup assembly align properly.
Paper feeder door-open switch
1. Remove the rear cover. See Rear cover on page 439.
2. Remove the right front cover. See
Right front cover on page 440.
3. Remove the right cover. See
Right cover on page 442.
4. Remove the right lower cover assembly. See
Right lower cover assembly on page 446.
460 Chapter 6 Removal and replacement ENWW