- Hewlett-Packard Color LaserJet Use

Loading custom-sized media into Tray 2, Tray 3, and Tray 4
The Custom media menu will be displayed when the Tray 2, Tray 3, or Tray 4 switch is in
the Custom size position. You must also change the size setting on the control panel to
custom and set the unit of measure, X dimension, and Y dimension. See
To configure a tray
to match print job settings for more information.
1. Remove tray from the printer.
2. Move the tray switch to the CUSTOM size position. Once a custom size is set for a tray,
it will be retained until the switch is moved back to STANDARD or until you manually
change the configuration.
3. Slide the media width guides all the way open and adjust the rear media-length guide to
the length of the paper being used.
92 Chapter 4 Printing tasks ENWW